User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            HP 5314A:Universal Counter
DATE:                  23-Oct-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       30
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
# This procedure is run with the MET/CAL Configuration #4 loaded.
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
  1.003  HEAD         INITIAL CONDITIONS
  1.004  DISP         Allow the UUT a 1 hour warm-up.
# 1.004  DISP         Connect the Mieco 1402 REFRENCE OUTPUT to the 8673C
# 1.004  DISP         FREQ STANDARD EXT input and set the 8673C INT/EXT
# 1.004  DISP         switch to the EXT position.
# 1.005  DISP         Connect the 8673C 10 MHz OUT to the 3325A EXT REF IN
# 1.005  DISP         connector.
  1.005  CALL         HP 5314A SUB PROCEDURE 1
  1.006  CALL         HP 5314A SUB PROCEDURE 2
  1.007  CALL         HP 5314A SUB PROCEDURE 3
  1.008  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.